Acton紫外——VUV/UV激光分束镜
General Details
Acton紫外——VUV/UV激光分束镜
Acton Optics & Coatings可以根据水平“P”偏振或垂直“S”偏振等要求进行优化，为您的应用定制分光器。如果需要，可在分束器的背面涂上抗反射涂层。可在阿克顿的标准基材上使用涂料。
这些多层，介质，低吸收涂层是理想的激光输出耦合器和束分裂应用。所有波长范围为126至353 nm的分束器，均按指定的激光波长和入射角校正反射率和透过率，以确保在高功率激光应用中具有优异的性能。标准分束器是为随机极化设计的。
| Wavelength | 10% +/-2% | 30% +/-5% | 50% +/-5% | 70% +/-5% | 90% +/-5% |
| 126nm | M126-P1045 | M126-P3045 | M126-P5045 | M126-P7045 | M126-P9045 |
| 147nm | M147-P1045 | M147-P3045 | M147-P5045 | M147-P7045 | M147-P9045 |
| 157nm | M157-P1045 | M157-P3045 | M157-P5045 | M157-P7045 | M57-P9045 |
| 172nm | M172-P1045 | M172-P3045 | M172-P5045 | M172-P7045 | M172-P9045 |
| 193nm | M193-P1045 | M193-P3045 | M193-P5045 | M193-P7045 | M93-P9045 |
| 248nm | M248-P1045 | M248-P3045 | M248-P5045 | M248-P7045 | M248-P9045 |
| 266nm | M266-P1045 | M266-P3045 | M266-P5045 | M266-P7045 | M266-P9045 |
| 308nm | M308-P1045 | M308-P3045 | M308-P5045 | M308-P7045 | M308-P9045 |
| 353nm | M353-P1045 | M353-P3045 | M353-P5045 | M353-P7045 | M353-P9045 |
NOTE: Beamsplitter Coating Part Numbers (Based on % Transmission)
| For Complete Beamsplitter: Coating Part # + Substrate Part # = Complete BeamsplitterFor example: To order a 308nm, 45° beamsplitter with 30% transmittance on a 1.0” flat UV grade fused silica substrate: Part # M308-P3045-1D-MBCoatings for rear surface use must be specified by adding ‘-S2’ to coating part numbers. |
Part numbers listed above are for 45° angle of incidence coating only. If normal incidence coatings are required, delete the ‘45’ from the coating part number.
Ex: Part # M193-P1045 would be Part # M193-P10. Generally, laser grade UV fused silica substrates are recommended for beamsplitters above 170nm. Beamsplitter coatings can be applied to customer supplied material. |
光谱曲线
注意：可根据要求定制
